Open Face Paint Booth Installation

Equipment · Double D Mechanical

Open Face Paint Booth Installation and Service

An open face paint booth provides a defined spray area with an open front and rear exhaust filtration. It can be useful for parts, fixtures, panels and fabricated components when the plant layout supports good capture, clear staging and controlled traffic near the booth face.

Discuss your installation

Open Front Capture Zone

Because the front is open, booth placement has a major effect on performance. Cross traffic, nearby doors, fans, welding areas or sanding operations can disturb airflow at the booth face. The work area should allow operators to position parts fully within the capture zone while keeping hoses and carts out of aisles.

Part Size and Staging

Open face booths are often used for components that vary in shape and handling method. Racks, carts, stands and lift devices should be included in the layout review, not treated as afterthoughts. The largest part should fit without blocking filter access or forcing operators to spray from awkward positions.

Exhaust and Replacement Air

The exhaust plenum, filters, fan and duct route should be matched to the booth opening and intended workload. Make-up air may be needed to prevent the booth from pulling air from uncontrolled parts of the building. Double D Mechanical reviews these mechanical conditions as part of installation or relocation planning.

Utility and Maintenance Details

Electrical service, lighting, compressed air and control locations need to be reachable without interfering with production. Maintenance access matters because open face booths depend on clean filters and unobstructed exhaust paths to capture overspray effectively.

Keep storage out of the booth face and filter service area.
Confirm part racks do not block the exhaust wall.
Plan compressed air drops so hoses stay clear of walkways.

Project questions

Frequently asked questions

What work is suited to an open face booth?

Open face booths are often used for parts, panels, frames, fixtures and fabricated components that can be positioned within the booth opening and exhaust capture area.

Does an open face booth need make-up air?

It may, depending on exhaust volume and building conditions. Replacement air helps keep airflow predictable and reduces pressure problems in the surrounding space.

What can interfere with booth capture?

Forklift traffic, open doors, nearby fans, blocked filters and poorly positioned work stands can all disturb airflow at the booth face.

Can an open face booth be moved to another bay?

Often yes, but the new location needs to be checked for exhaust routing, electrical service, compressed air, clearances and interaction with nearby processes.

What should be available before a site visit?

Provide the booth dimensions, workpiece sizes, photos of the area, roof or wall exhaust options and details on nearby production activities.