Open face paint booths for metal fabrication
Metal fabrication shops may coat weldments, frames, tanks, brackets, guards and panels that change shape from job to job. Double D Mechanical installs, relocates and services open face paint booths with attention to open-front access, capture airflow, exhaust, make-up air, utility routing and the material handling path into the booth.
Discuss your installationFlexible Space for Varied Weldments
Open face booths suit shops where parts change often and front access matters. The layout should include the biggest recurring weldment, the cart or stand under it, forklift clearance and operator space at the booth opening.
Front-Face Air Capture
The booth depends on air moving into the open face instead of being pulled sideways by building drafts. Exhaust, make-up air, nearby welding ventilation and door openings should be reviewed together.
Coordination With Shop Utilities
Fabrication shops often have air lines, weld power, cranes, drains and crowded roof space. Booth utilities and exhaust should be routed so they support finishing work without blocking fabrication, inspection or future moves.
Information for a Walk-Through
Part dimensions, fixture sizes, coating steps, available electrical service, compressed air capacity, roof access and photos of the proposed area help turn a walk-through into a practical installation plan.
Frequently asked questions
When is an open face paint booth a practical choice?
It can be practical when parts need front access, handling equipment must stay outside the booth envelope or the work mix changes often enough that flexible approach space matters.
What affects capture at the booth opening?
Exhaust volume, filter condition, booth depth, make-up air direction, nearby doors, fans and cross traffic can all affect how consistently air moves into the open face.
What utilities are usually reviewed?
Electrical service, compressed air, gas or heat source, lighting, controls and interlocks are commonly reviewed along with exhaust and replacement air requirements.
Can Double D Mechanical service an existing open face booth?
Yes. Service can include fan and exhaust troubleshooting, filter access issues, make-up air concerns, mechanical repairs and utility connection work within the booth system.