Open face paint booths for oil and gas fabrication
Oil and gas fabrication shops coat skids, frames, pipe supports, guards, tanks and welded assemblies that may arrive by forklift, crane or rolling fixture. Double D Mechanical installs, relocates and services open face paint booths with attention to capture airflow, exhaust routing, make-up air, utility connections and practical access around heavy work.
Discuss your installationOpen Work Zones for Large Fabrications
Open face booths can work well where the part, cart or weldment needs front access and cannot be boxed in by a tight enclosure. Layout planning should account for crane picks, forklift approach, fixture width and room for operators to reach edges, corners and underside areas.
Capture Air at the Spray Face
Air must move into the booth opening with enough consistency to pull overspray away from the operator and work area. Exhaust discharge, replacement air, nearby doors and cross traffic should be reviewed together so the booth does not fight the building.
Utility Routing Around Welded Assemblies
Electrical service, compressed air, gas or heat, controls and lighting need routes that do not interfere with material handling. Connections should leave access to panels, filters, fans and dampers after guards, carts and storage racks are in place.
Details to Gather Before a Visit
Useful planning items include part dimensions, fixture weights, handling methods, coating process notes, roof or wall exhaust options, make-up air location, available utilities and any known pressure or overspray concerns.
Frequently asked questions
When is an open face paint booth a practical choice?
It can be practical when parts need front access, handling equipment must stay outside the booth envelope or the work mix changes often enough that flexible approach space matters.
What affects capture at the booth opening?
Exhaust volume, filter condition, booth depth, make-up air direction, nearby doors, fans and cross traffic can all affect how consistently air moves into the open face.
What utilities are usually reviewed?
Electrical service, compressed air, gas or heat source, lighting, controls and interlocks are commonly reviewed along with exhaust and replacement air requirements.
Can Double D Mechanical service an existing open face booth?
Yes. Service can include fan and exhaust troubleshooting, filter access issues, make-up air concerns, mechanical repairs and utility connection work within the booth system.