RTT Finishing Solutions Open Face Paint Booths
RTT Finishing Solutions open face paint booths are common for parts that need flexible access from the front while overspray is drawn toward rear filters. Installing or moving one requires careful attention to booth opening, part size, spray direction, exhaust capacity, make-up air, and clearance for operators and handling equipment.
Discuss your installationBrand names identify the equipment discussed. Discuss your equipment model and installation scope with Double D; manufacturer authorization is not implied.
Open Front Working Clearance
The booth opening has to match the way operators load, rotate, spray, and remove parts. The site layout should account for racks, carts, hoists, lift tables, and any masking or staging activity that happens immediately outside the booth face.
Capture at the Filter Wall
Open face booths depend on steady air movement from the room into the booth. Obstructions at the opening, cross-drafts from doors or fans, and poor make-up air can reduce capture and pull overspray where it does not belong.
Exhaust Path and Fan Access
The rear filter wall and exhaust plenum need a clear path to the fan and discharge point. Installation planning should include duct supports, wall or roof openings, fan service space, filter access, and protection from nearby equipment.
Connections for a Practical Work Cell
Electrical service, lighting, compressed air drops, grounding provisions, and control locations should be placed for the people using the booth. Good connection planning reduces hoses and cords across walkways and keeps routine service reachable.
Frequently asked questions
When is an open face booth a good fit?
It can work well for parts that are loaded from the front and do not require a fully enclosed spray space. The part size, coating method, and surrounding room air all need to be reviewed.
What information helps with layout planning?
Part dimensions, rack sizes, loading equipment, desired spray positions, ceiling height, wall construction, utility locations, and the preferred exhaust route are all important.
Can an open face booth be moved to another wall?
Often it can, but the new wall or area must support exhaust routing, utility connections, operator clearance, and make-up air without creating cross-drafts at the booth face.
Why is the area in front of the booth important?
The booth pulls room air through the open face. Crowding that area with racks, doors, fans, or traffic can disturb airflow and make the booth harder to use consistently.
What should maintenance staff be able to reach?
Filters, lights, fan components, controls, and duct cleanout points should be accessible without moving major production equipment.