Open face paint booths for pipe and valve coating
Pipe and valve coating work often involves long round parts, fittings, flanges, valve bodies and supports that need clear access for rotation, masking, touch-up and handling. Double D Mechanical installs, relocates and services open face paint booths with attention to spray-face capture, exhaust paths, make-up air and utilities near the coating area.
Discuss your installationHandling Long Round Parts
Pipe and valve work may need rollers, stands, carts or lift points that move with the workpiece. The booth opening, floor space and operator paths should be planned around the support equipment, not only the pipe diameter.
Air Movement Across Curved Surfaces
Round parts can create uneven spray angles and hidden backsides. Open face booth planning should consider part rotation, masking access, exhaust draw and whether nearby air movement could pull overspray across freshly coated surfaces.
Booth Connections for Coating Cells
Compressed air, electrical service, lighting, controls and heat connections should be located so hoses and cords do not cross handling paths. Exhaust and make-up air routing should also leave space for cranes, storage and inspection areas.
Service Space for Filters and Fans
Filter banks, fan assemblies, dampers and duct cleanout points need reachable space after the coating cell is operating. Maintenance access should be checked against stands, carts, racks and any enclosure walls around the booth.
Frequently asked questions
When is an open face paint booth a practical choice?
It can be practical when parts need front access, handling equipment must stay outside the booth envelope or the work mix changes often enough that flexible approach space matters.
What affects capture at the booth opening?
Exhaust volume, filter condition, booth depth, make-up air direction, nearby doors, fans and cross traffic can all affect how consistently air moves into the open face.
What utilities are usually reviewed?
Electrical service, compressed air, gas or heat source, lighting, controls and interlocks are commonly reviewed along with exhaust and replacement air requirements.
Can Double D Mechanical service an existing open face booth?
Yes. Service can include fan and exhaust troubleshooting, filter access issues, make-up air concerns, mechanical repairs and utility connection work within the booth system.