Large Open Face Booths for Ohio Oil and Gas and Valve Fabrication
Fabrication shops in Ohio building skids, valve assemblies and pipe components often need a spray area big enough for crane-handled parts but simpler than a fully enclosed booth. A large open face booth sized for the work can provide that, with exhaust filters along the back wall and an open front for crane and forklift access.
Discuss your installationWide Openings for Big Parts
Large open face booths are built wide and tall to take skids and fabricated assemblies. A larger opening needs more exhaust to maintain air velocity across it. We size exhaust to the opening so overspray stays contained.
Crane and Forklift Access
With no doors, cranes and forklifts can place parts directly. Roof height or a crane slot may be needed for overhead cranes. Booth location is planned around the crane bay and travel path.
- Crane hook height and travel path
- Forklift approach and turning room
- Floor loading for heavy parts
Pipe and Valve Coating
Pipe spools and valves often sit on stands or rollers in the booth. Rotating stands let painters coat all sides. Lighting and stand placement help coating coverage on round shapes.
Plant Air and Exhaust
Big open face booths move a lot of air. That exhaust needs to be replaced, especially in a fabrication bay where doors are often open. Replacement air and exhaust stack placement are planned together.
Planning a booth or oven project in Ohio
Crews mobilize from Houston; Ohio is roughly 1,000 miles away, so equipment, panels and tooling are staged and shipped ahead of the install crew.
Manufacturing in Ohio is concentrated around Columbus, Cleveland, Cincinnati, Dayton, and Toledo. The sectors most likely to be specifying spray booths, blast rooms, powder systems and cure ovens there include automotive assembly and suppliers, aerospace, steel and metal fabrication, and semiconductors.
Cold winters mean make-up air heaters are sized for sub-freezing intake, and booth or oven placement has to account for frost lines, snow loads on roof penetrations and winter slab work.
Frequently asked questions
Can an open face booth handle oil and gas skids?
Yes, if sized for them. Large openings need more exhaust air.
Can a crane place parts directly into the booth?
Yes, with appropriate booth height or a crane slot.
How are pipe spools painted in an open face booth?
Often on rotating stands or rollers so painters can reach all sides.
Will a large booth affect our plant air?
Yes. Exhaust must be replaced, so plan replacement air.
What maintenance does the booth need?
Filter changes based on pressure readings, light cleaning and fan service.