Heavy Equipment Finishing Systems

Industries · Double D Mechanical

Heavy Equipment and Agriculture Finishing Systems

Agricultural and heavy equipment finishing involves large frames, booms, buckets, guards, tanks, cabs and welded assemblies that demand space, lifting access and durable process equipment. Double D Mechanical supports installation, relocation and service for paint booths, powder systems, ovens, exhaust, make-up air and utility connections in these environments.

Discuss your installation

Handling Oversized Components

Large equipment parts need enough clearance for cranes, hoists, forklifts, carts and turntables. Booth and oven placement should account for the full swept path of the workpiece, including rigging points and the space needed to rotate or reposition heavy assemblies.

Airflow for Complex Shapes

Frames, buckets and cabs can create shadowed areas and turbulent zones inside a booth. Air supply, exhaust location, filter condition and booth loading practices all affect how overspray clears around recesses, edges and deep fabricated sections.

Ovens and Cure Space

Cure ovens for heavy equipment parts must be reviewed for door clearance, floor loading, burner and fan access, exhaust routing and part spacing. Utility connections should be arranged so maintenance can reach heat, airflow and control components without moving stored parts.

Preparing for Installation Work

Before a site visit, gather the part envelope, coating process, production sequence, lift equipment needs, available utility information and any known building constraints. Roof structure, slab condition, column spacing and nearby operations can all affect installation choices.

Project questions

Frequently asked questions

What makes heavy equipment finishing different from smaller parts finishing?

The size, weight and geometry of the workpieces drive booth dimensions, handling paths, exhaust volume, cure space and service access around the equipment.

What should be measured before planning a booth?

Measure the largest part length, width and height, plus rigging clearance, aisle width, door openings, crane hook height and staging areas on both sides of the process.

Why can complex parts be harder to ventilate?

Recesses, weldments, guards and frames can interrupt smooth airflow. Booth loading and air balance need to support consistent overspray removal around those shapes.

Can an existing booth be adapted for larger agricultural parts?

Sometimes, but the structure, doors, airflow, exhaust, make-up air, utilities and clearances all need review before assuming larger parts can be handled safely and consistently.

What utilities are commonly involved?

Gas, electrical power, compressed air, controls, exhaust and make-up air are common, with fire protection and roof work often coordinated separately.