Paint booth removal for LNG energy modules
LNG energy module fabrication can involve tall frames, pipe racks, structural skids and coating steps that need open movement through the plant. Double D Mechanical removes paint booths by planning the teardown sequence, exhaust and make-up air isolation, utility disconnects, access for lifts and the final condition of the area for future production use.
Discuss your installationModule movement through the removal area
Booth removal should account for module height, aisle width, door clearance and the way work moves between blast, coating, assembly and inspection. Panels, doors, plenums and fan sections need a removal path that does not trap large frames or block critical staging space.
Air system shutdown points
Exhaust duct, intake sections, make-up air, heaters and controls should be traced before work begins. Knowing which components serve only the booth and which pass through shared plant areas helps prevent confusion during disassembly.
Mechanical and electrical coordination
Removal may touch gas piping, power feeds, lighting, control wiring, compressed air and roof penetrations. Double D Mechanical coordinates the sequence so trades can isolate systems, remove equipment and leave the area ready for the next production layout.
Walkthrough inputs for module shops
Have booth drawings, utility maps, roof plans, current production flow, maximum module dimensions and preferred staging areas ready. Photos from mezzanines, roof areas and loading doors are useful when planning how large sections will leave the building.
Frequently asked questions
Why does module size matter during paint booth removal?
Large skids and frames affect lift access, staging locations and the route for moving booth sections out without interrupting surrounding production.
Should make-up air equipment be reviewed even if only the booth is being removed?
Yes. Make-up air equipment may be tied into the booth, the building balance or other nearby finishing operations, so its role should be clear before disconnects.
What information helps plan rooftop work?
Roof curb locations, fan weights if available, duct routes, access points and any nearby roof equipment help define the removal approach.
Can the old booth area be prepared for a different process?
The removal scope can be planned around future use by identifying what should be removed, capped, protected or left accessible for follow-on trades.