Paint Booth Relocation in Idaho
Double D Mechanical relocates paint booths for Idaho facilities that need to reorganize finishing, add room for larger workpieces, or shift coating work closer to prep and assembly. A successful move depends on the booth structure, the new production path, exhaust routing, make-up air, utility reach, and maintenance access.
Discuss your installationRelocation Scope by Booth Style
Crossdraft, downdraft, side-downdraft, open-face, truck, and large-equipment booths each come apart differently. Floor pits, raised basements, ceiling plenums, door systems, lighting, and fan packages should be identified before the booth is disconnected.
Workpiece Movement in the New Layout
The new booth location should match the size and handling method of the parts being coated. Palletized parts, vehicle bodies, fabricated frames, trailers, and equipment housings may need different door clearances, staging space, and operator access around the spray zone.
Utility and Control Reconnection
Power, lighting, control panels, interlocks, compressed air, gas or heated air, and fire protection interfaces must be coordinated with the relocated booth. Routes should be planned so future filter changes, fan service, burner access, and panel service are not blocked.
Idaho Relocation Checklist
The first review should capture the old and new conditions in enough detail to plan the move.
- Booth model information, dimensions, panel layout, and door configuration
- Existing fan, duct, stack, intake, and make-up air locations
- New booth footprint with aisle, staging, and maintenance clearances
- Utility points, disconnect needs, and control wiring routes
- Lift access, floor loading concerns, overhead obstructions, and shutdown limits
Planning a booth or oven project in Idaho
Crews mobilize from Houston; Idaho is roughly 1,500 miles away, so equipment, panels and tooling are staged and shipped ahead of the install crew.
Manufacturing in Idaho is concentrated around Boise, Idaho Falls, and Coeur d'Alene. The sectors most likely to be specifying spray booths, blast rooms, powder systems and cure ovens there include semiconductors, food processing equipment, wood products, and trailer and recreational manufacturing.
Cold winters mean make-up air heaters are sized for sub-freezing intake, and booth or oven placement has to account for frost lines, snow loads on roof penetrations and winter slab work.
Frequently asked questions
Is relocating a downdraft booth different from moving a crossdraft booth?
Yes. Downdraft booths may involve floor pits, basements, or underfloor duct paths, while crossdraft booths usually focus on end-wall airflow, exhaust placement, and door clearance.
Can the booth be improved during relocation?
Relocation is a practical time to review worn seals, damaged panels, lighting, filter access, duct condition, and service clearances before the booth is reassembled.
Who should be involved in the site walkdown?
Facility engineering, maintenance, production, safety, and any trades responsible for power, gas, compressed air, fire protection, roofing, or building penetrations should be represented.
What drawings are useful?
Booth drawings, fan data, make-up air data, building layouts, utility drawings, and any sketches of the new finish area help define the relocation plan.