New York Powder Coating Job Shop Equipment
A New York powder coating job shop often works out of an older or leased building with limited ceiling height, aging electrical service and neighbors close by. Fitting a booth and oven into that space takes careful planning of exhaust, power and gas. Double D Mechanical installs, relocates and services powder booths, ovens and their air and utility connections.
Discuss your installationElectric or Gas Cure
Some buildings have limited gas service and strong electrical service, or the reverse. Electric ovens avoid gas piping and flue work but put a heavy load on the electrical service. Gas ovens need adequate gas pressure and volume. The building often decides which is practical.
Exhaust Near Neighbors
Booth exhaust passes through filters before discharge, and oven exhaust carries heat and vapors. Locating stacks with attention to nearby windows, intakes and property lines helps avoid problems. Confirm local requirements before cutting new openings.
- Know the roof structure and access
- Keep stacks away from intakes
- Plan filter maintenance access
Low Ceilings and Booth Height
Older buildings may limit booth and oven height. Lower-profile booths and ovens with side-mounted equipment can fit where standard units will not, but part height limits follow.
Ceiling Height and Service Limits
Lease terms for roof and wall work, electrical and gas service capacity, ceiling height and largest part sizes.
Planning a booth or oven project in New York
Crews mobilize from Houston; New York is roughly 1,400 miles away, so equipment, panels and tooling are staged and shipped ahead of the install crew.
Manufacturing in New York is concentrated around New York City, Buffalo, Rochester, Albany, and Syracuse. The sectors most likely to be specifying spray booths, blast rooms, powder systems and cure ovens there include semiconductors, optics and photonics, transportation equipment, and metal fabrication.
Cold winters mean make-up air heaters are sized for sub-freezing intake, and booth or oven placement has to account for frost lines, snow loads on roof penetrations and winter slab work.
Frequently asked questions
Should we choose an electric or gas oven?
It depends on the building's available service, operating costs and oven size. Both work.
Can a booth fit under a low ceiling?
Lower-profile designs exist, but they limit the height of parts you can coat.
What landlord issues come up?
Roof penetrations, wall openings and gas or electrical upgrades often need landlord approval.
Can equipment move with us if we relocate?
Yes, booths and sectional ovens can be disassembled and reinstalled.