Powder Coating Booth Installation in Georgia
Powder coating is unforgiving about air. Too little capture and powder drifts into the shop; too much turbulence and transfer efficiency drops. A powder booth also needs clean, dry compressed air, good grounding and a recovery or filter system matched to how often colors change. Double D Mechanical installs, relocates and connects powder coating booths for Georgia manufacturers and coating shops.
Discuss your installationPowder for Electrical Equipment Steel
Powder is a common finish on electrical equipment steel such as cabinets, covers, brackets and some transformer components. The Virginia Transformer plant in Rincon reflects the kind of electrical manufacturing growth that feeds powder demand in Georgia, both in-house and at job shops that coat for those manufacturers. A booth that keeps powder contained and recovers it efficiently has a direct effect on cost per part.
Recovery Booth or Spray-to-Waste
The first decision is what happens to oversprayed powder.
- Cartridge recovery booths reclaim powder for reuse, best for long runs of one color
- Spray-to-waste filter booths are simpler to clean between colors
- Cyclone systems separate powder before final filters and suit high-volume lines with frequent changes
- Hybrid layouts pair a recovery booth for main colors with a waste booth for specials
Compressed Air Quality Comes First
Powder guns and pumps need dry, oil-free air. Moisture causes clumping, uneven flow and surface defects. Most powder booth installs include a refrigerated or desiccant dryer and filtration at the booth, plus a regulated supply for the cartridge pulse cleaning system. We check the existing compressor and air piping before connecting the booth.
Where the Booth Sits in the Shop
A powder booth works best with a short, clean path to the oven and away from blasting, grinding and liquid spray. In Atlanta-area job shops that often share space between processes, layout matters as much as equipment. We look at part flow from pretreatment through the booth to the oven and confirm the booth exhaust does not push powder-laden air toward other operations.
Planning a booth or oven project in Georgia
Crews mobilize from Houston; Georgia is roughly 700 miles away, so equipment, panels and tooling are staged and shipped ahead of the install crew.
Manufacturing in Georgia is concentrated around Atlanta, Savannah, Augusta, and Columbus. The sectors most likely to be specifying spray booths, blast rooms, powder systems and cure ovens there include automotive assembly and EV, aerospace, transportation equipment, and heavy machinery.
Hot, humid summers and mild winters put the emphasis on make-up air cooling or tempering, filter change schedules and keeping intake away from loading doors.
Frequently asked questions
Does a powder booth need to vent outside?
Many cartridge recovery booths return filtered air to the room after final filtration. Whether yours vents outside depends on the booth design, the powders used and local requirements.
How fast can we change colors?
Color change speed depends on the booth design, recovery method and cleaning procedure. Spray-to-waste and smooth-wall booths are generally faster than large cartridge recovery systems.
What compressed air does a powder booth need?
Clean, dry, oil-free air at stable pressure for the guns and pulse cleaning. A dryer and filtration at the booth is common.
Can you relocate a powder booth with the oven?
Yes. Booth and oven moves are often done together so the new layout keeps the part path short.
Is grounding important in a powder booth?
Very. Parts, hangers, the booth and the operator should all be grounded for good transfer efficiency and safe operation.