Large Equipment Booths for Indiana Construction and Ag Machinery
Excavators, loaders, combines and tractors can drive into a paint booth under their own power, which simplifies handling but puts heavy, concentrated loads on the booth floor and door thresholds. Indiana shops building or refurbishing this machinery need a booth designed for that traffic.
Discuss your installationDrive-In Access
Machines driving into the booth need door openings wide and tall enough for cabs, booms and attachments. Approach ramps and thresholds must suit tracks and tires without damaging seals.
- Tallest machine with cab and attachments
- Widest machine at tracks or tires
- Approach and threshold design
Floor Loads From Tracks
Tracked machines put concentrated loads on the floor. A solid slab floor in a side downdraft or crossdraft layout avoids grating concerns. If a pit is used, grating and supports must be rated for the loads.
Engine Exhaust and Booth Air
Machines driving in produce engine exhaust. Shutting engines off promptly and ventilating before spraying helps. Booth exhaust can clear fumes, but painting should wait until air is clean.
Heated Air for Cure
Heated make-up air and cure modes help machines dry and move out. Heating capacity matches the booth's volume.
Planning a booth or oven project in Indiana
Crews mobilize from Houston; Indiana is roughly 850 miles away, so equipment, panels and tooling are staged and shipped ahead of the install crew.
Manufacturing in Indiana is concentrated around Indianapolis, Fort Wayne, Evansville, and South Bend. The sectors most likely to be specifying spray booths, blast rooms, powder systems and cure ovens there include automotive and powertrain, RV and trailer manufacturing, steel, and aerospace components.
Cold winters mean make-up air heaters are sized for sub-freezing intake, and booth or oven placement has to account for frost lines, snow loads on roof penetrations and winter slab work.
Frequently asked questions
Can machines drive into the booth?
Yes, with door openings, thresholds and floors designed for them.
Is a pit floor safe for tracked machines?
Only with grating and supports rated for the loads. Solid floor layouts avoid the concern.
What about engine exhaust in the booth?
Shut engines off promptly and ventilate before painting.
Can machines cure in the booth?
Yes, with heated air and cure controls.