Downdraft Paint Booths for Aerospace MRO
Aerospace MRO paint spaces must account for aircraft parts, access stands, tooling, masking areas and controlled airflow around sensitive surfaces. Double D Mechanical installs, relocates and services downdraft paint booths, exhaust duct, make-up air and utility connections for maintenance and repair facilities.
Discuss your installationParts, Stands and Access Equipment
Aerospace MRO work can range from removable panels and nacelle parts to larger assemblies that need stands and careful handling. Booth layout should include the workpiece and the access equipment used around it, because platforms, carts and fixtures can affect both clearance and airflow. Door placement and approach space should support safe movement without turning painted parts through tight aisles.
Downward Airflow Around Complex Shapes
Downdraft booths rely on clean intake air moving through the work zone and out through the floor. Curved surfaces, stands and masking can interrupt that path, so floor openings and fixture positions should be reviewed before installation. Exhaust and make-up air planning should also consider adjacent prep, sanding and parts cleaning areas.
Utility and Control Tie-Ins
Aerospace facilities often have dense building services, including compressed air, power distribution, lighting, fire protection and process utilities. Double D Mechanical coordinates the booth connections with existing mechanical conditions, leaving room for controls, panels, fan service and future troubleshooting.
Pre-Visit Details That Matter
Before a site visit, useful information includes booth drawings, part envelope dimensions, access stand sizes, ceiling and door heights, roof conditions, utility locations and the expected path from prep to booth to cure or inspection. These details help identify conflicts before equipment is unloaded.
Frequently asked questions
What makes aerospace MRO booth planning different?
The workpiece may require stands, tooling, masking and careful handling, so the booth must be planned around both the part and the access method.
Can existing utilities be reused during a booth relocation?
Some utilities may be reusable, but capacity, routing, condition and the new booth position must be checked before relying on them.
Why are fixture locations important in a downdraft booth?
Fixtures and stands can block floor airflow, which can change overspray capture and coating conditions around the part.
What should be available for a site survey?
Gather layout drawings, equipment dimensions, utility information, roof access details and photos of the proposed booth area.
How should maintenance access be planned?
Leave clear access to filters, fans, intake sections, lights, control panels and lower plenum or floor areas after stands and carts are in place.