Abrasive Blast Booths for Shipbuilding and Marine Work
Shipbuilding and marine repair operations use abrasive blast booths to prepare plates, welded modules, hatches, ladders, tanks, fittings and removable vessel components before coating. Double D Mechanical installs, relocates and connects blast booths with attention to part handling, dust collection, exhaust, make-up air, compressed air and service access.
Discuss your installationMoving Marine Components
Marine parts can be heavy, wide or awkwardly shaped. Booth layout should account for cranes, forklifts, carts, rigging points, door clearances and staging space between fabrication, blasting and coating.
Dust Collection in Fabrication Buildings
Blasting near welding, cutting and coating work requires careful dust control. Collector location, exhaust duct routing and replacement air should be coordinated so contaminated air does not disrupt adjacent work zones.
Abrasive Recovery and Cleanup Paths
Media recovery, floor grating, sweep-in areas and cleanup equipment should be planned around the parts being blasted. Access to hoppers and reclaim components helps maintenance crews keep the booth usable.
Mechanical and Electrical Coordination
Compressed air, electrical feeds, controls, lighting and duct supports may need to cross congested industrial spaces. Early coordination helps avoid conflicts with cranes, doors, pipe racks and existing exhaust systems.
Site Visit Readiness
Bring part dimensions, handling methods, blast media expectations, compressor information, proposed location notes, roof or wall access options and the desired sequence from blast to coating.
Frequently asked questions
What marine parts are common candidates for blast booths?
Plates, fittings, ladders, hatches, tanks, guards, brackets and removable assemblies may be blasted when their size and handling needs fit the booth.
How does fabrication work affect booth placement?
Welding, cutting, crane movement and coating operations can affect aisle space, duct routing, dust control and installation sequencing.
Why plan cleanup access early?
Abrasive media and dust require regular handling, so recovery equipment, grating and collector service areas need reachable space.
Can the booth connect to existing compressed air?
Possibly, but the available volume, pressure, pipe size and distance to the booth should be reviewed before relying on an existing system.