Abrasive Blast Booths for LNG Energy Modules
LNG energy module fabrication involves frames, skids, pipe racks, supports and welded assemblies that often need surface preparation before coating. Double D Mechanical installs, relocates and connects abrasive blast booths with attention to large workpieces, dust collection, exhaust, make-up air, compressed air, electrical routing and maintenance access.
Discuss your installationModule Part Movement
Skids and module components can require wide travel lanes, lifting equipment and staging near fabrication and coating areas. Booth location should be reviewed against the largest part envelope, fixture height and handling method.
Dust Capture for Heavy Steel
Blasting structural members and pipe supports creates a heavy dust load. Collector location, duct routing, filter access and replacement air should be coordinated so dust does not move into assembly or coating work.
Utilities Around Module Lines
Compressed air, electrical feeds, lighting, controls and recovery equipment need routes that do not conflict with cranes, pipe racks, weld stations or existing building services.
Abrasive Handling and Upkeep
Media recovery and cleanup areas should remain reachable even when large parts are staged nearby. Planning should include grating access, hopper locations, blast hose storage and collector maintenance space.
Walkdown Information to Prepare
Bring module component dimensions, expected media, compressor information, proposed booth area, overhead clearance notes, available power and the process route from blasting to coating.
Frequently asked questions
What LNG module components may use a blast booth?
Frames, pipe racks, skids, brackets, supports and other welded components may be blasted when they fit the booth and handling plan.
How should the booth relate to coating operations?
The layout should support movement from fabrication to blasting to coating without crossing congested aisles or contaminating finished work.
What makes compressed air planning critical?
Abrasive blasting uses significant air at the nozzle, so compressor capacity, pipe sizing and distance to the booth can affect performance.
Can dust collection equipment be set outside?
Outdoor placement may be possible depending on space, duct routing, service access, structural support and discharge requirements.