Abrasive Blast Booths for Georgia Coaters and Fabricators
Plenty of shops need to blast parts every day without needing a full walk-in blast room. A modular abrasive blast booth fills that gap: a prefabricated enclosure with its own dust collector and a recovery hopper or partial floor, sized for medium parts like brackets, wheels, gates, small weldments and enclosure components. Double D Mechanical installs, relocates and connects abrasive blast booths for Georgia shops in the Atlanta and Savannah areas and beyond.
Discuss your installationA Smaller Footprint With Real Production Value
A blast booth earns its spot by taking surface prep off the critical path. For a powder coater, that might mean stripping returns and prepping steel in-house instead of sending it out. For a fabricator feeding heavy electrical customers, like the transformer work represented by the Virginia Transformer plant in Rincon, it can mean blasting brackets, covers and smaller components that do not justify time in a large room. The booth's footprint is modest enough to fit in an existing bay.
What Gets Connected
Modular booths arrive as panels and components. Making them work is a connection job.
- Dust collector placement and duct from the booth exhaust plenum
- Recovery hopper or floor sections tied to the media separator and blast pot
- Compressed air supply sized for the nozzle, with moisture removal
- Electrical power to the collector, recovery motor and lights
- Breathing air for the operator if the booth is a walk-in design
Planning Around Media and Dust
Media choice influences the whole booth. Recyclable steel grit and shot need a separator that can handle their weight; lighter media like glass bead or aluminum oxide break down faster and load the collector differently. We size the dust collector for the booth and the media so visibility stays good and the cartridges do not blind early. Clean-air discharge is placed away from paint booth intakes so blast fines do not end up in a finish.
Moving a Booth Within Metro Atlanta
One advantage of modular booths is that they can follow the business. When a shop moves to a bigger building, the booth, collector and recovery system come apart, travel and go back together. We document the connections before disassembly and plan new duct, power and air runs for the new layout so the booth comes back online without surprises.
Planning a booth or oven project in Georgia
Crews mobilize from Houston; Georgia is roughly 700 miles away, so equipment, panels and tooling are staged and shipped ahead of the install crew.
Manufacturing in Georgia is concentrated around Atlanta, Savannah, Augusta, and Columbus. The sectors most likely to be specifying spray booths, blast rooms, powder systems and cure ovens there include automotive assembly and EV, aerospace, transportation equipment, and heavy machinery.
Hot, humid summers and mild winters put the emphasis on make-up air cooling or tempering, filter change schedules and keeping intake away from loading doors.
Frequently asked questions
What is the difference between a blast booth and a blast room?
The terms overlap, but a blast booth usually means a smaller, modular enclosure for medium parts with simpler recovery, while a blast room is a larger installation with a full recovery floor and bigger collector.
Will we have to dig a pit for a modular blast booth?
Most modular booths sit on the existing slab with a hopper or above-floor recovery. Pits are uncommon at this size.
Can a blast booth share a dust collector with other equipment?
A dedicated collector is the usual approach. Sharing makes airflow hard to control and can mix incompatible dusts.
How much floor space does a blast booth take?
The booth itself plus space for the collector, blast pot, separator and part staging. We map the full footprint during the site visit.
Can you set up a blast booth for a powder coating shop?
Yes. Blasting before powder is common. We place the booth and its discharge so blast dust stays away from the powder booth and oven.