Spray-Tech/Junair Trailer Booth Work
Trailer finishing can involve long frames, enclosed bodies, flatbeds, specialty structures and refurbished assemblies that need controlled prep and coating space. Double D Mechanical installs, relocates and services paint booths, blast rooms, exhaust, make-up air, lighting, heating and utility connections used around Spray-Tech/Junair equipment.
Discuss your installationBrand names identify the equipment discussed. Discuss your equipment model and installation scope with Double D; manufacturer authorization is not implied.
Trailer Length And Tracking
Trailers need straight entry, enough door clearance and room for the tow vehicle, dolly, cart or fixture that moves the workpiece. Booth layout should consider the full path into paint, not only the booth footprint.
- Confirm overall trailer length, height, width and tongue or hitch clearance.
- Check whether the trailer rolls, is lifted or rides on a production fixture.
- Leave room for masking, ladders, platforms and inspection around the body.
Frame Prep And Body Coating Flow
Trailer frames and bodies often move from blast or sanding into primer, topcoat and inspection. Blast room placement, media reclaim, dust control, paint booth entry and staging should be arranged to reduce cross traffic between dirty and clean work.
Air Load In Long Booths
Long booths require careful attention to exhaust path, make-up air supply and building pressure. Fan location, duct routing, heater connections and openings through the building should be reviewed before equipment is set.
Maintenance Without Blocking Production
Trailer shops can fill open floor space quickly. Filters, fan sections, lights, dampers, controls and utility shutoffs should remain accessible so routine service does not depend on clearing the entire bay.
Frequently asked questions
What should we document before moving a trailer booth?
Document booth dimensions, trailer envelopes, entry paths, duct routes, make-up air location, electrical service, gas or fuel connections and any building penetrations.
Can blast room work be coordinated with trailer booth installation?
Yes. Blast containment, media reclaim, dust collection and clean transfer into paint should be reviewed with the booth layout.
Why does building pressure matter for trailer finishing?
Booth exhaust removes air from the building. Replacement air helps reduce drafts, door problems and unstable airflow around the trailer.
What access should be left around Spray-Tech/Junair equipment?
Plan access for filters, lights, fans, control panels, heater components, dampers, duct connections, fire protection interfaces and trailer handling equipment.