Spray Systems for Aerospace MRO
Aerospace MRO coating areas may need to handle removable panels, nacelle components, stands, tooling and larger aircraft structures. Spray Systems open-face and large-equipment paint booths should be planned around access height, clean work zones, exhaust routing, make-up air and the movement of support equipment.
Discuss your installationBrand names identify the equipment discussed. Discuss your equipment model and installation scope with Double D; manufacturer authorization is not implied.
Aircraft Component Access
MRO work often depends on stands, lifts, carts and fixtures that move with the part. Booth layout should account for tool clearance, operator reach, floor loading concerns, protected staging and routes back to inspection or reassembly.
Airflow Across Broad Surfaces
Large panels and curved surfaces need stable air movement to help control overspray and finish consistency. Exhaust face location, booth depth, make-up air delivery and nearby door openings should be reviewed together.
Mechanical Routes In Hangar Areas
Exhaust duct, power, compressed air, controls and lighting may need to work around tall doors, cranes, fire protection, roof structure and existing hangar utilities. Early coordination helps avoid routing conflicts above the work zone.
Site Information To Collect
Useful pre-visit information includes part dimensions, coating process steps, lift and stand types, proposed booth location, ceiling clearances, available utilities and photos of the roof or wall areas where air systems may route.
Frequently asked questions
What aerospace MRO parts influence booth layout?
Panels, fairings, nacelle parts, control surfaces, access doors and tooling-mounted components can affect booth opening size, stand clearance and operator reach.
Why review hangar airflow before placing a booth?
Large doors, open volumes and nearby ventilation can influence booth balance and overspray control, especially around broad aircraft surfaces.
What utilities are commonly coordinated?
Electrical power, compressed air, controls, lighting, exhaust and make-up air are typically reviewed, along with any heating or air handling equipment tied to the booth.
How can maintenance access be protected?
Keep filters, fans, lights, control panels and duct components reachable without blocking aircraft movement, lifts or required work platforms.
What photos help before a site visit?
Photos of the proposed area, overhead structure, utility panels, roof or exterior wall routes, nearby doors and existing ventilation equipment are helpful.