Spray Systems for Military Vehicles and Munitions
Military vehicle structures and empty munition casings can require large work areas, controlled prep and careful sequencing before sensitive components are installed. Spray Systems large equipment booths may be used with paint mixing rooms, blast rooms, media reclaim, make-up air, fire protection interfaces and exhaust systems. Double D Mechanical installs, relocates and services the mechanical and utility connections that support those finishing areas.
Discuss your installationBrand names identify the equipment discussed. Discuss your equipment model and installation scope with Double D; manufacturer authorization is not implied.
Large Structures And Safe Access
Vehicle hulls, body sections, frames and empty casings need room for lifts, stands, masking and inspection. Booth doors, work platforms, aisle widths and staging zones should be reviewed around the actual workpiece envelope. The layout should also preserve access to emergency paths, service panels and overhead equipment.
Blast-To-Coat Sequencing
Surface preparation and coating should be arranged so blasted or cleaned parts do not move back through dirty areas. Blast rooms, reclaim equipment, paint mixing spaces and spray booths need a sequence that supports inspection hold points and clean staging. Double D Mechanical can coordinate ductwork, fan locations, heater connections and utility routing around that process flow.
Air Replacement For Big Bays
Large booths and blast areas can place a heavy demand on building air. Exhaust, make-up air, heat and control wiring should be reviewed together so the finishing bay can maintain workable conditions while adjacent production continues.
- Document the largest vehicle or casing size, fixture height and handling method.
- Identify prep, mask, blast, coat, dry and inspection steps.
- Confirm gas, electrical, compressed air, roof access and equipment service zones.
Utility Routing With Restricted Space
Defense-related finishing areas can have crowded ceilings, pits, cranes or fixed building services. Utility routing should avoid blocking crane travel, filter service, door movement and fan access. Relocation planning should include a condition review of booth panels, lights, ducts, fans, controls and heater components before equipment is moved.
Frequently asked questions
What information helps plan military vehicle finishing equipment?
Workpiece dimensions, fixture or stand details, handling method, process sequence, utility locations, crane or lift limits and maintenance access needs are useful before a site visit.
How should blast and coating areas be arranged?
The goal is to keep dirty prep, cleaned parts and finished work separated while maintaining a direct path for handling, inspection and any required masking.
Why is exhaust planning important for large vehicle booths?
Large booths move substantial air. Exhaust and replacement air affect building pressure, temperature, drafts and the performance of nearby work areas.
Can existing booth equipment be reused in a new location?
Reuse depends on equipment condition, available space, removal access, utility reach, duct routing, fan condition and whether the new layout provides service clearance.
What should be accessible after installation?
Filters, lights, doors, fans, ducts, heaters, dampers, controls and fire protection interfaces should remain reachable for inspection and service.