RTT Finishing Solutions equipment for metal fabrication
RTT Finishing Solutions, formerly Col-Met, makes paint booths, prep stations, paint mixing rooms and powder coating booths used around fabricated metal parts. Double D Mechanical installs, relocates and services these systems with attention to production flow, exhaust, make-up air, utilities and maintenance access.
Discuss your installationBrand names identify the equipment discussed. Discuss your equipment model and installation scope with Double D; manufacturer authorization is not implied.
Fit the booth to fabricated parts
Metal fabrication work can include frames, brackets, panels, weldments and assemblies that vary in size and handling method. Booth placement should account for fork truck movement, carts, rack loading, part rotation and space to mask or inspect work without blocking adjacent welding, grinding or assembly areas.
Airflow for paint and powder areas
Crossdraft, downdraft and open-face booths each place different demands on intake air, exhaust routing and building pressure. Powder coating booths also need attention to containment, reclaim access when present and separation from dusty fabrication processes.
- Confirm where clean make-up air will enter the booth area.
- Keep exhaust discharge paths coordinated with roof steel and nearby intakes.
- Preserve access to filters, fans and duct inspection points.
Utilities and trade sequencing
A booth or paint mixing room may require electrical power, lighting, controls, compressed air, gas piping, fire protection coordination and roof or wall penetrations. Sequencing matters because booth panels, duct sections and utility rough-in can compete for the same overhead space.
Relocation details to capture early
Before moving an existing RTT Finishing Solutions booth, document panel condition, fan locations, duct routing, control panel placement and utility connection points. Current photos, nameplate information, floor dimensions and ceiling height help identify what must be modified before reassembly.
Frequently asked questions
What should a fabrication shop review before adding a booth?
Review the largest parts, handling equipment, available ceiling height, utility routes, exhaust path, make-up air location and space needed for filter changes and fan service.
Can a paint booth sit near welding or grinding?
It can be nearby in some layouts, but intake air should be protected from dust, smoke and metal fines. Traffic flow should also keep prep debris away from wet finishing areas.
What makes powder booth installation different from wet paint booth work?
Powder booths need careful attention to powder containment, airflow balance, part grounding practices and access to collection equipment, while wet paint booths center more on overspray capture, exhaust and make-up air.
What information helps plan a service visit?
Useful items include equipment photos, symptoms, filter condition, fan or burner issues, control messages, utility locations and any recent changes to production or building ventilation.