RTT Finishing Solutions Crossdraft Paint Booths
RTT Finishing Solutions crossdraft paint booths move air horizontally from intake toward exhaust, making the relationship between doors, filters, workpiece position, and exhaust wall especially important. Installation work focuses on setting the booth square, keeping air paths open, routing exhaust safely, and connecting utilities without disrupting the shop layout.
Discuss your installationBrand names identify the equipment discussed. Discuss your equipment model and installation scope with Double D; manufacturer authorization is not implied.
Intake and Exhaust Alignment
A crossdraft booth relies on a clean path from the intake end to the exhaust end. Placement should avoid blocking intake filters with nearby walls, storage, parked vehicles, or material racks, and the exhaust side needs room for duct transitions, fan service, and filter changes.
Fit Around Shop Movement
Many crossdraft booths sit along active production lanes. Before installation, review how parts, vehicles, forklifts, carts, and personnel move around the booth so door swings, staging space, and approach clearances do not create daily bottlenecks.
Ductwork, Fans, and Roof Work
Exhaust routing may run through a wall or up through the roof, depending on the building. The installation plan should confirm fan orientation, support points, weather caps, curb conditions, and access for service after startup.
Utility Tie-Ins and Start Checks
Electrical service, lighting, compressed air, controls, and heated air components must be coordinated with the booth layout. Startup checks should look at fan rotation, door operation, filter seating, control response, and airflow direction through the work area.
Frequently asked questions
What makes a crossdraft booth different to install?
The intake-to-exhaust path is the main driver. The booth has to be placed so air can enter cleanly, pass the workpiece, and leave through the exhaust filters without short-circuiting around obstructions.
Can existing ductwork be reused?
Sometimes, but it has to be evaluated for size, condition, routing, support, and connection points. Changes in booth location or airflow demand can make old ductwork unsuitable.
What should be checked before moving a crossdraft booth?
Confirm booth dimensions, door clearances, roof or wall penetrations, electrical feeds, fan locations, and the condition of panels, filters, lights, and controls before disassembly.
How does the workpiece affect booth placement?
Long parts, vehicles, or racks need enough approach room and consistent positioning inside the booth. The layout should keep the coated surface in the intended airflow path.
Why review nearby building air movement?
Open doors, exhaust systems, and make-up air units can change booth pressure. Those conditions can affect overspray capture and finish cleanliness.