Rohner for Automotive Bodies and Parts
Automotive body and parts finishing can involve vehicle shells, panels, bumpers, brackets, wheels, fixtures and repeat components moving through prep, paint, powder or cure. Rohner equipment in this category can include paint booths, open-face booths, powder coating booths, cure ovens, make-up air and exhaust systems. Double D Mechanical installs, relocates and services the booth, oven, air, exhaust and utility connections that support those workflows.
Discuss your installationBrand names identify the equipment discussed. Discuss your equipment model and installation scope with Double D; manufacturer authorization is not implied.
Body Clearance And Part Staging
Vehicle bodies need door approach, side clearance and operator access around rooflines, rockers and ends. Separate parts need carts, racks or hanging space that does not block the body booth or prep stations. Planning should include the real envelope created by stands, carts and masking materials.
Prep, Paint And Cure Routing
Automotive finishing may involve sanding, masking, primer, color, clear, powder coating or cure steps depending on the work. The layout should separate dusty prep from clean coating and keep finished parts moving toward inspection or assembly. Booths, ovens and mixing areas need coordinated utility and exhaust routes.
Make-Up Air And Booth Comfort
Paint booths and ovens can exhaust enough air to affect nearby prep or assembly areas. Make-up air, heat, fan discharge, compressed air and electrical service should be reviewed as one system so the booth performs consistently through the shift.
Retrofit And Service Planning
Existing booths may need new lights, filters, ducts, air units, controls or utility changes as production shifts. Relocation planning should include the removal path, panel condition, roof openings, door fit and service access around fans, burners and controls.
Frequently asked questions
What should be measured for an automotive booth layout?
Measure the largest body or part rack with doors, carts, stands and operator clearance included. Also note prep, masking and inspection space.
Can body work and parts work share equipment?
Sometimes, but the layout needs to account for different handling methods, coating requirements, curing needs and traffic between prep and finish areas.
Why review make-up air before installation?
Make-up air affects booth balance, temperature, drafts and building pressure. It should be coordinated with exhaust, heat and nearby openings.
What utilities are common for automotive finishing equipment?
Electrical service, compressed air, gas where heat is used, control wiring, exhaust ductwork and make-up air are common items to review.
What should be checked before a booth relocation?
Check panel condition, doors, lights, fans, ducts, controls, utility isolation, roof access, rigging path and service space in the new location.