Rohner for Agricultural Implements
Agricultural implement finishing often involves long frames, welded attachments, heavy brackets, guards and assemblies that need coating before final buildout or field use. Rohner equipment in this setting can include large equipment paint booths, powder coating booths, cure ovens, open-face booths, make-up air and exhaust systems. Double D Mechanical installs, relocates and services the booth, oven, air, exhaust and utility connections that help the finishing area fit real production movement.
Discuss your installationBrand names identify the equipment discussed. Discuss your equipment model and installation scope with Double D; manufacturer authorization is not implied.
Implement Shape And Handling
Plan the finishing area around the longest frame, widest attachment, tallest rack and the lift method used to move parts. Toolbar frames, hitches, guards and fabricated weldments may need different spray angles and turning space. Booth doors, floor clearances and staging aisles should match how parts arrive from fabrication and leave for assembly.
Prep, Blast And Coating Sequence
Implement parts often move through cleaning, abrasive blasting, masking, primer, topcoat or powder before they are ready for assembly. The layout should limit backtracking between dirty prep areas and clean coating space. Double D Mechanical can coordinate booth placement, oven connections, exhaust ductwork and utility drops with the surrounding process equipment.
Air, Heat And Utility Planning
Large booths and ovens can affect building pressure, temperature and fuel demand. Make-up air, exhaust fans, burner connections, compressed air and electrical service should be reviewed together before equipment pads, roof openings or wall penetrations are set.
- Measure parts with racks, hooks, carts, stands and fork pockets included.
- List each finish step from raw steel through inspection and rework.
- Confirm gas, electrical, compressed air, roof access and drain or wash-area constraints.
Maintenance Space For Seasonal Work
Seasonal production swings make access to filters, lights, doors, fans, burners, controls and duct sections important. Relocation work should include a review of panel condition, seals, hinges and utility reach before equipment is reset. Keeping service paths open helps maintenance work happen without blocking implement movement through the bay.
Frequently asked questions
What should be measured before a site visit for implement finishing?
Measure the largest frame, tallest rack, widest attachment, cart path, lift clearance and door approach. Include stands, hooks and handling equipment, not just the bare part.
Can one finishing area handle both frames and smaller attachments?
It can, but the layout needs to account for different hanging methods, spray access, curing needs and staging space so small parts do not interfere with large-frame movement.
Why is make-up air important for agricultural equipment booths?
Large exhaust volumes can pull air from nearby production areas. Make-up air helps control drafts, temperature swings and pressure changes around the finishing space.
What utilities should be reviewed early?
Gas service, electrical capacity, compressed air, control wiring, roof access, exhaust routing and any nearby wash or blast equipment should be reviewed before final placement.
What matters when relocating an existing booth or oven?
Panel condition, door fit, duct sections, fan access, heater connections, control locations, floor condition and the removal path all affect the relocation plan.