Midwest Finishing Systems for Metal Fabrication
Metal fabrication shops need finishing equipment that can handle changing part families without slowing weld, prep, coating or shipping. Midwest Finishing Systems powder booths, powder coating lines and cure ovens should be planned around workpiece size, staging, exhaust, make-up air, compressed air, electrical service and access for cleaning and maintenance.
Discuss your installationBrand names identify the equipment discussed. Discuss your equipment model and installation scope with Double D; manufacturer authorization is not implied.
From Fabrication To Coating
Weldments, formed parts, brackets and frames need a practical path into the finishing area. Booth and line placement should leave space for carts, racks, forklifts, load tables and part inspection without blocking upstream fabrication.
Powder Booth Capture Conditions
Booth airflow depends on exhaust, collector condition, door position and make-up air. Nearby fans, open dock doors and high traffic aisles should be considered because drafts can affect transfer efficiency and housekeeping.
Oven And Line Connections
Cure ovens and conveyors require coordinated electrical service, controls, exhaust and gas service where used. Ductwork and utility drops should be routed so they do not interfere with crane paths, lift movement or future service.
Walkthrough Preparation
Have layout drawings if available, photos of the area, part dimensions, desired throughput, hanger or rack information, utility panel locations, compressed air details and any known rigging constraints ready for review.
Frequently asked questions
How should a fabrication shop choose a finishing area location?
The location should reduce unnecessary handling between fabrication, prep, coating, cure, inspection and shipping while preserving space for maintenance.
What causes powder booth airflow problems?
Common issues include unbalanced exhaust, poor replacement air, clogged filters, open doors, cross drafts and collector access that is hard to maintain.
What matters when connecting a cure oven?
Exhaust route, electrical service, controls, gas service where used, heat clearances and access to fans, doors and service panels should be reviewed together.
What should be photographed before a relocation?
Photograph equipment nameplates, ducts, controls, wiring routes, utility tie-ins, floor anchors, conveyor sections, booth panels and the equipment path.