Garmat USA Paint Booth Relocation
Relocating a Garmat USA paint booth requires more than moving panels from one spot to another. Downdraft, semi-downdraft, automotive refinish booth and prep station equipment must be disconnected, dismantled, protected, reassembled and reconnected around production flow, exhaust routing, make-up air and utility access.
Discuss your installationBrand names identify the equipment discussed. Discuss your equipment model and installation scope with Double D; manufacturer authorization is not implied.
Existing Booth Documentation
Before disassembly, the booth should be documented from multiple angles so panel order, door hardware, light locations, duct connections, controls and utility routes can be understood. Notes on damaged panels, missing fasteners, worn seals and previous modifications help prevent confusion during reassembly.
Fit in the New Production Area
The new location should be checked for part movement, vehicle approach, door swing, painter access, filter service, nearby prep work and clear aisles. A booth that fits on a floor plan can still create problems if the approach path, roof route or maintenance side is too tight for normal operation.
Mechanical Disconnects and Reconnection
Relocation work touches exhaust ductwork, make-up air, electrical feeds, controls, compressed air and sometimes gas or fire protection interfaces. Sequencing with other trades matters so isolation, demolition, roof work, utility rough-in and final connections do not block each other.
Plant Readiness Before the Move
The plant team should identify shutdown windows, staging space, lift routes, dock access and the destination layout before field work begins. Remove vehicles, parts racks and stored materials from both the current booth area and the new location so panels and duct sections can be handled without unnecessary risk.
Frequently asked questions
What information helps plan a Garmat USA booth relocation?
Useful information includes booth dimensions, photos, duct and fan locations, make-up air details, utility routes, destination layout and any limits on shutdown time or staging space.
Can a booth relocation include exhaust changes?
Yes. A new booth position often requires revised duct routing, fan placement, roof or wall penetrations and make-up air coordination.
What parts of the booth need protection during relocation?
Panels, doors, light frames, lenses, controls, filters, hardware and duct transitions should be handled carefully and kept organized for reassembly.
Why review the new location before dismantling the booth?
The new location must support production flow, service access, utility routing and exhaust discharge. Reviewing it early reduces the chance of discovering layout conflicts after the booth has been taken apart.