Clemco Blast Booths For Valves
Valve and fitting finishing often involves abrasive preparation, masking and coating of castings, machined surfaces, flanges, threads and small to mid-size components. Double D Mechanical installs, relocates and services abrasive blast booths, powder coating booths, cure ovens, paint booths, exhaust ductwork, make-up air equipment and utility connections for component finishing areas.
Discuss your installationBrand names identify the equipment discussed. Discuss your equipment model and installation scope with Double D; manufacturer authorization is not implied.
Component Handling And Masked Faces
Valve bodies and fittings need repeatable support so machined faces, threads and sealing surfaces can be protected while exposed surfaces are prepared. A Clemco style abrasive booth should be located with room for carts, turntables, racks and inspection tables.
From Blast To Powder Or Paint
Small components can move quickly from blasting to coating, but the path still needs dust control. Masking, blowdown, powder application, liquid spray and oven loading should be separated enough to keep abrasive out of finished surfaces.
Air, Exhaust And Heat Connections
Abrasive booths, paint booths, powder booths and ovens each bring different exhaust, make-up air, electrical, compressed air and heat requirements. Routing should keep service panels, filters, doors and burners reachable for maintenance.
Service Access For Repeated Runs
High-volume component work puts wear on filters, lights, grating, booth openings and controls. A site visit is easier to scope with photos, part sizes, coating methods, utility information, filter details and known trouble spots.
Frequently asked questions
What surfaces are usually protected on valves?
Flanges, threads, machined faces, sealing surfaces and internal openings are commonly protected during preparation and coating.
Why separate blast from powder application?
Abrasive dust can contaminate powder application and curing areas, so airflow, housekeeping and part transfer paths need careful planning.
What equipment may be involved?
Abrasive booths, paint booths, powder booths, ovens, exhaust fans, ductwork, make-up air equipment, lights, controls and compressed air connections may be involved.
What helps with a repair request?
Photos, equipment tags, filter sizes, part descriptions, utility locations and a clear description of the operating problem are helpful.