Blast-It-All blast room installation and service
Blast-It-All blast rooms provide enclosed abrasive blasting space for heavy parts, fabricated assemblies and equipment components that need controlled surface preparation. Double D Mechanical installs, relocates and services blast room systems with attention to enclosure layout, air movement, dust collection, media recovery, utilities and maintenance access.
Discuss your installationBrand names identify the equipment discussed. Discuss your equipment model and installation scope with Double D; manufacturer authorization is not implied.
Heavy Part Access And Doors
Blast room doors, interior clearance and outside staging should match the way parts are handled. Forklifts, carts, cranes and rails can all change the required approach space and the protection needed around lights, wall panels and hoses.
Dust Control Across The Enclosure
Effective dust control depends on where air enters, where dust is pulled out and how the collector is serviced. Duct routes, fan location, filter access and replacement air should be coordinated before the room is set.
Reclaim Components Below The Work Area
Media recovery equipment can involve grating, hoppers, conveyors, separators and return lines. These components need alignment, guarding and access so abrasive can move reliably without making floor service difficult.
Utilities And Maintenance Clearances
Compressed air, electrical feeds, lighting, controls and collector connections should be routed around daily operation and future service. Keep access to motors, belts, filters, bearings, doors and panels open for inspection and repair.
Frequently asked questions
What should a plant provide before a blast room visit?
Provide room measurements, part sizes, handling method, utility locations, collector information, photos and a description of the work being blasted.
How does part handling affect installation?
The handling method affects door size, staging space, floor protection, operator access and where utilities can be routed safely.
Why plan dust collector access early?
Collectors need room for filter changes, dust removal, fan service and duct inspection after the room is in operation.
Can a blast room be installed near a coating line?
It can be planned near finishing operations, but dust containment, staging and airflow should protect cleaned and coated parts.
What are signs the room needs service?
Dust escaping doors, low visibility, poor media recovery, unusual fan noise, lighting failures or compressed air issues are common signs.