Booth Exhaust Systems for Truck Body Painting
Truck body coating requires exhaust systems that can capture overspray and move air consistently across long panels, roof lines, beds, doors, and fabricated assemblies. Double D Mechanical installs, relocates, and services booth exhaust ductwork, fans, stacks, filters, and related air connections for industrial finishing operations.
Discuss your installationCapture Across Long Body Surfaces
Airflow must support the way operators coat sides, rear openings, roofs, and loose panels. Exhaust plenum location, filter area, booth openings, and part placement can all affect whether air moves evenly or leaves dead spots around high or recessed surfaces.
Duct Routes Through the Building
Exhaust ductwork has to fit around roof structure, cranes, lighting, mezzanines, utilities, and adjacent production equipment. Fan placement, stack route, cleanout access, and support points should be reviewed before installation so the exhaust path is serviceable and does not interfere with material handling.
Balance With Make Up Air
A strong exhaust system needs compatible replacement air. If make up air enters in the wrong place or at the wrong rate, it can disturb spray patterns, move dust, or create pressure problems at doors and nearby rooms.
- Document booth dimensions, exhaust fan data, and current duct routing.
- Review where replacement air enters the finishing area.
- Keep filter, fan, damper, and cleanout access open for maintenance.
Repair and Relocation Planning
For an existing exhaust system, inspection should cover duct condition, fan vibration, supports, filter frames, access doors, stack condition, and controls. A relocation also needs a new route for discharge, building penetrations, and coordination with any booth or make up air changes.
Frequently asked questions
What affects exhaust performance in a truck body booth?
Booth size, part placement, filter loading, fan condition, duct routing, replacement air, and spray workflow all affect performance.
Can exhaust ductwork be rerouted?
It can often be evaluated, but the new route needs proper support, service access, discharge planning, and coordination with building obstructions.
Why does make up air matter for exhaust?
Exhaust removes air from the building, so replacement air must enter in a way that supports capture without creating drafts or pressure problems.
What access should be maintained?
Filters, fan components, belts, dampers, cleanouts, controls, and stack connections should remain reachable after the booth is operating.
What should be checked before relocating an exhaust system?
Check fan condition, duct condition, supports, roof or wall penetrations, stack location, control wiring, and the new booth layout.