Pipe Spool Coating Booths and Blast Rooms
Pipe spool and valve coating operations need finishing equipment that fits flanges, elbows, supports, threaded areas and internal or external coating steps. Double D Mechanical supports paint booth, blast room, exhaust, make-up air, media reclaim and utility work for these production areas.
Discuss your installationSpool Handling and Rotation
Pipe assemblies often need stands, rollers, carts or hoists so applicators can reach around welds, flanges and branch connections. Booth and room layouts should allow rotation, masking and inspection without blocking the loading area.
Surface Prep Before Coating
Blast rooms and abrasive blast booths should be planned around spool length, support points, media recovery and dust collection. Clean staging between blasting and coating helps protect prepared surfaces before primer or finish coats are applied.
Exhaust for Cylindrical Parts
Round parts and open pipe ends can influence overspray patterns and operator position. Exhaust, intake air and make-up air should be reviewed with typical spool diameters, lengths and rack spacing in mind.
Information for a Coating Line Walk
Before a site visit, gather maximum spool size, coating materials, blast media, handling method, masking requirements, utility locations and existing booth or room information if equipment is already in place.
- Identify where parts wait after blast and after coating.
- Show crane, hoist, cart or roller paths.
- Note compressed air, gas, electrical and exhaust routing constraints.
Frequently asked questions
What equipment is common for pipe spool coating?
Open-face booths, large equipment booths, blast rooms, abrasive blast booths, media reclaim systems, exhaust systems and make-up air units are common.
Why plan around rotation equipment?
Rollers, stands and hoists change the working envelope, operator position and clearance needed inside the booth or blast room.
How does masking affect layout?
Masking flanges, threads and connection faces requires table space, clean staging and a route that keeps masked parts from being damaged before coating.
What service items should remain accessible?
Filters, fans, motors, reclaim equipment, dust collectors, lights, heaters, dampers and controls should have clear access.
Can existing coating equipment be relocated?
Relocation starts with checking panel condition, fan and duct condition, utility connections, controls, reclaim equipment and the path for moving large sections.