Powder Coating Booths for HVAC Units and Fans
HVAC cabinets, fan housings and sheet metal panels often need powder coating before assembly. Double D Mechanical installs, relocates and connects powder coating booths with attention to part presentation, airflow, powder recovery, exhaust, utilities and movement toward curing or downstream assembly.
Discuss your installationBooth Fit for Panels and Housings
The booth opening and interior space should match the racks, hooks, carts or conveyor method used for HVAC parts. Cabinet doors, fan housings and long panels need enough clearance for coating both faces, edges and formed returns.
Powder Capture and Recovery Layout
Airflow should pull powder into the booth without disturbing the spray cloud or leaving heavy buildup around part supports. Collector access, cartridge changes, reclaim equipment and color change workflow should be considered during layout.
Flow to Cure and Assembly
Powder booth placement should support the path to the cure oven, cooling area and final assembly. Tight turns, crossing traffic and limited rack storage can slow production even when the booth itself has enough capacity.
Electrical, Air and Control Needs
Powder equipment typically needs electrical service, compressed air, grounding points, controls and exhaust or collector connections. These should be planned with booth placement so service panels and cleanout points remain reachable.
Planning Information to Prepare
Gather part sizes, rack or conveyor details, powder handling method, expected color change needs, oven location, utility locations, floor space limits and photos of nearby fabrication and assembly zones.
Frequently asked questions
What HVAC parts are commonly considered for powder booths?
Cabinet panels, fan housings, frames, guards, access doors and formed sheet metal parts are common examples.
Why does part hanging or racking matter?
Racks and hooks determine how parts pass through the booth, how operators reach edges and how powder moves around the surfaces.
What should be reviewed with powder recovery?
Collector access, cartridge service, reclaim path, color change needs, waste handling and room around the booth should be reviewed together.
How does the oven affect booth placement?
The booth should support a practical route to curing and cooling without crossing unrelated traffic or overloading staging areas.
What utilities are important before installation?
Electrical service, compressed air, grounding, controls and collector connections should be confirmed before the booth is set.